Table of Contents
Advertisement
5. Connect the power cord to the power source.
6. Make sure that the power supply LED is green.
The installation is complete.
Installing a hot-plug DC power supply
The following input power cord option might be purchased from an authorized reseller:
J6X43A—HPE 12 AWG 48 V DC 3.0 m Power Cord
If you are not using an input power cord option, the power supply cabling should be made in consultation with a licensed
electrician and be compliant with local code.
If you are replacing the factory installed ground lug, use the KST RNB5-5 crimp terminal ring or equivalent. Use an
M5-0.80 x 8 screw to attach the ground lug to the power supply.
62
Hardware options installation
Advertisement
Table of Contents
