Aaclci - ICP DAS USA ZT-2017 User Manual

6.2.29 @AACLCi

Description
This command is used to clear the status of the low alarm for a specific channel
of a specified module.
Syntax
@AACLCi[CHECKSUM](CR)
@ Delimiter character
AA The address of the module to be cleared in hexadecimal format (00 to
FF)
CLC The command to clear the status of the low alarm
i The channel to be cleared, zero based
Response
Valid Command
Invalid Command
! Delimiter character to indicate a valid command
? Delimiter character to indicate an invalid command
AA The address of the responding module in hexadecimal format (00 to FF)
There will be no response if the command syntax is incorrect, there is a
communication error, or there is no module with the specified address.
Examples
Command @03DI
Response !030080
Reads the current status of the alarms for module 03 and returns a response
indicating that the command was successful, and that a low alarm has occurred
on channel 7.
Command @03CLC7
Response !03
Clears the status of the low alarm for channel 7 of module 03 and returns a
response indicating that the command was successful.
Command @03DI
Response !030000
ICP DAS, ZT-2017 and ZT-2017C AI Series User Manual, Version 1.0.1
Copyright © 2012 by ICP DAS Co., Ltd. All Rights Reserved.
!AA [CHECKSUM](CR)
?AA[CHECKSUM](CR)
Page 82