Aa7Cirrr - ICP DAS USA ZT-2017 User Manual

6.2.12 $AA7CiRrr

Description
This command is used to set the type code of a specific channel on a specified
module.
Syntax
$AA7CiRrr[CHECKSUM](CR)
$ Delimiter character
AA The address of the module to be set in hexadecimal format (00 to FF)
7 The command to set the channel range code
Ci i specifies the input channel to be set (0-7)
Rrr rr represents the type code of the channel to be set. See Section 4 for
details.
Response
Valid Command
Invalid Command
! Delimiter character to indicate a valid command
? Delimiter character to indicate an invalid command
AA The address of the responding module in hexadecimal format (00 to FF)
There will be no response if the command syntax is incorrect, there is a
communication error, or there is no module with the specified address.
Examples
Command $037C0R08
Response !03
Sets the type code for channel 0 of module 03 to 8 (-10 ~ +10V), and the module
returns a response indicating that the command was successful.
Command $037C5R09
Response !03
Sets the type code for channel 5 of module 03 to 9 (-5 ~ +5V), and the module
returns a response indicating that the command was successful.
Command $037C1R80
Response ?03
ICP DAS, ZT-2017 and ZT-2017C AI Series User Manual, Version 1.0.1
Copyright © 2012 by ICP DAS Co., Ltd. All Rights Reserved.
!AA[CHECKSUM](CR)
?AA[CHECKSUM](CR)
Page 53