Aacli - ICP DAS USA ZT-2017 User Manual

6.2.28 @AACLi

Description
This command is used to clear the low latch value for a specific channel of a
specified module.
Syntax
@AACLi[CHECKSUM](CR)
@ Delimiter character
AA The address of the module to be cleared in hexadecimal format (00 to
FF)
CL The command to clear the low latch value
i The channel to be cleared, zero based
Response
Valid Command
Invalid Command
! Delimiter character to indicate a valid command
? Delimiter character to indicate an invalid command
AA The address of the responding module in hexadecimal format (00 to FF)
There will be no response if the command syntax is incorrect, there is a
communication error, or there is no module with the specified address.
Examples
Command @03RL1
Response !03-06.000
Reads the low latch value for channel 1 of module 03 and returns a response
indicating that the command was successful, with a value of -06.000.
Command @03CL1
Response !03
Clears the low latch value for channel 1 of module 03 and returns a response
indicating that the command was successful.
Command @03RL1
Response !03+00.000
Reads the low latch value for channel 1 of module 03 and returns a response
ICP DAS, ZT-2017 and ZT-2017C AI Series User Manual, Version 1.0.1
Copyright © 2012 by ICP DAS Co., Ltd. All Rights Reserved.
!AA[CHECKSUM](CR)
?AA[CHECKSUM](CR)
Page 80