Siemens SINAMICS PERFECT HARMONY GH180 Function Manual page 164

Parameter Assignment/Addressing
6.17 Options for Meter Menu (8)
The following menu contains the pick lists to select the variables to be displayed on the front
panel default display.
Table 6-93 Display Parameters Menu (8000) Parameters
Parameter ID
Status variable 1 8001
Status variable 2 8002
Status variable 3 8003
Status variable 4 8004
Status variable 5 8005
Status variable 6 8006
Status variable 7 8007
* See Table Pick list variables for the front display.
Available for drive tool only.
1
Table Pick list variables for the front display contains the abbreviation, variable name, units and
description of the standard pick list variables used in menus such as the Historic Log Menu or the
Display Variable Menu.
The variable name column contains the name of the display variable. The content of the variable
name column is displayed as you scroll through the list of available display variables.
The abbreviation column contains an abbreviation that is displayed after a variable is selected
from the list. The abbreviation is between 3 and 4 characters in length and is displayed on the
front panel of the drive.
Table 6-94 Pick list variables for the front display
Abbreviation Variable Name
IMRF Mag current ref
ITRF Trq current ref
FLDS Flux DS
FLQS Flux QS
VDRF Vds reference
VQRF Vqs reference
SLIP Slip frequency
%SPD Motor speed
FREQ Output Frequency
RPM Motor speed
VLTS Motor voltage
IMAG Mag current filtered
ITRQ Trq current filtered
ITOT Motor current
162
Default
DEMD
%SPD
VLTS
ITOT
IMRF
IMRF
IMRF
Units
A
A
%
%
%
%
%
%
Hz
rpm
V
A
A
A
Description
Select variable 1 to display on the LCD display.*
Select variable 2 to display on the LCD display.*
Select variable 3 to display on the LCD display.*
Select variable 4 to display on the LCD display.*
Select variable 5 to display on the Tool
Select variable 6 to display on the Tool
Select variable 7 to display on the Tool
Description
Output I reference.
ds
Output I reference.
qs
Motor Flux DS. Main flux component, magnitude of flux
vector.
Motor Flux QS. Quadrature component; normally close to
or at zero.
Motor V reference. Direct component.
ds
Motor V reference. Quadrature component.
qs
Motor slip frequency.
Motor speed with slip correction.
Motor I filtered. Motor voltage producing current.
ds
Motor I filtered. Torque producing current.
qs
Motor total motor current.
display.*
1
display.*
1
display.*
1
NXGPro+ Control Manual
Operating Manual, A5E50491925A