Options For Meter Menu (8) - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

6.17

Options for Meter Menu (8)

Note
Changing Drive Parameters
Only Siemens trained personnel are authorized to change drive parameters.
Familiarize yourself with the safety notes in Section Safety Notes for Parameter Changes and
preferentially contact Siemens customer service before changing the default configuration.
The Meter Menu (8) consists of the following menu options:
• Display Parameters Menu (8000)
• Hour Meter Setup Menu (8010)
• General Drive Parameters Menu (Set Time, Software Version, Language, Output Units)
• Input Harmonics Menu (8140)
• High Speed Recorder Parameters (8220)
These menus are explained in the following tables.
Table 6-92 Meter Menu (8) Parameters
Parameter ID
Display parameters 8000
Hour meter setup 8010
Input harmonics 8140
High Speed Recorder 8220
Parameters
Fault display override 8200
Set the clock time 8080
Display version num‐ 8090
ber
Customer order 8100
Customer order 8101
Customer drive 8110
NXGPro+ Control Manual
Operating Manual, A5E50491925A
Units De‐ Min
fault
Submenu
Submenu
Submenu
Submenu
Off
Function
Function
0 0
0 0
1 0
Max Description
Access the display parameters. See Table Dis‐
play Parameters Menu (8000).
Access the hour meter setup parameters. See
Table Hour Meter Setup (8010).
Access the input harmonics parameters. See Ta‐
ble Input Harmonics Menu (8140). Refer to
chapter High Speed Recorder in the ToolSuite
Pro+ Manual (A5E03086439) for full descrip‐
tion of the High Speed Recorder functionality.
Access High Speed Recorder parameters. See
Table High Speed Recorder Parameters Menu
(8220).
Enable or disable the display of fault/alarm mes‐
sages on the keypad.
Change the time and date of the real-time clock
chip.
Display the installed version of firmware.
9999999 View the 7 digit customer order number. This
parameter is now obsolete due to ID 8101 on
Version 4.1.0 code.
9999999999 View the 10 digit customer order number. This
parameter replaces ID 8100 on Version 4.1.0
code and later.
9999999 View the customer drive number.
Parameter Assignment/Addressing
6.17 Options for Meter Menu (8)
161