Ml Diagnostic Indicators (T76) - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

Software user interface
9.2 Multi-Language Keypad
Do not disconnect control power as a method to reset the security level.
When the security level is reset, the display shows a "Security Level Cleared" message.
Figure 9-43
Activating Numerical Menu Access Mode
This mode allows you to go instantly to any security approved menu, parameter or pick list using
the four digit ID number associated with the target item.
Perform the following steps:
1. Press the [SHIFT] key followed by the right arrow key [⇒]. The display prompts you for the
desired ID number.
2. Enter the desired ID number using the numeric keys on the keypad.
If the number is a valid ID number and the current security level permits access to that item, then
the desired item will be displayed.
Note
Accessing higher security level menus
If you request access to a menu number that is assigned a higher security level than the current
security level, the drive will prompt for the appropriate security level code.
Within the menu structure, when not in edit mode, the right arrow acts like the [ENTER] key upon
the menu item displayed while the left arrow climbs the menu hierarchy.
9.2.1.8

ML Diagnostic Indicators (T76)

The multi-language keypad and display interface contains three diagnostic LED indicators that
are located above the display:
• [POWER ON]
• [FAULT]
• [RUN]
Functions of the diagnostic LED indicators
[POWER ON]
The [POWER ON] indicator is illuminated when control power is supplied to the system.
380
S e c l e v c l e a r e d
Security Level Cleared message on the display
NXGPro+ Control Manual
Operating Manual, A5E50491925A