Siemens SINAMICS PERFECT HARMONY GH180 Function Manual page 398

Software user interface
9.4 Security Measures
USB flash disk requirement
1. The flash disk must be FAT32.
– Insert a USB flash disk.
– Open File Explorer.
– Right-click on the USB drive and select Propeties.
– Flle system: FAT32
2. The FAT32 partition must be the first primary partition.
3. The flash disk must have a drive label.
– Insert USB flash disk.
– Open File Explorer
– Right-click on the USB drive and select Propeties.
– The entry field next to the picture should have a label. Example: USB8GB (length should
4. The flash disk should be USB2.0.
NOTICE
Known issues with USB flash disk
• Only one manufacturer/type of flash disk was tested; Sandisk Cruzer Glide 16 GB USB2.0.
• Verbatim Cle USB flash disks are not recognized
• For other USB flash disks brands and types, the two known failure of USB flash disks modes
Keypad error messages
The following message definitions will be displayed on the keypad as "Error. See eventlog. #9xx",
where xx is one of the following errors.
• Error 900 – USB partition error (e.g. not 1st partition or not FAT32).
• Error 901 – USB unmount error (can generally be ignored but might indicate flash disk errors).
• Error 902 – USB unmount retry error (can generally be ignored but might indicate flash disk
errors).
• Error 903 – USB mount error (e.g. flash disk not recognized, not FAT32, file/disk corruption).
USB usage while drive running
The NXGPro+ has two interlocks that affect USB functionality. One is so that all USB port
functionality will not start from keypad while drive is either: Not CR3 Inhibited, Not Idle, or Not
Faulted. That is, the drive must be CR3 Inhibited, Idle, or Faulted to use USB functionality. The
other is that the drive cannot be started while any USB function is active processing the keypad
request. The latter requires an SOP flag ReadyToRun_I as part of the TempFlag01_O main flag.
396
be 1-8 characters)
are:
– Cannot mount and/or write to flash disk.
– The secure system keys are ignored on startup, and the emergency/update/recover keys
cannot be used.
NXGPro+ Control Manual
Operating Manual, A5E50491925A