Siemens SINAMICS PERFECT HARMONY GH180 Function Manual page 408

Software user interface
9.6 ML Keypad
Re-displaying the Version Number
Use the display version number (8090) function in Meter Menu (8) to re-display the version
number.
The version number is displayed on the identification/version screen.
Figure 9-58
Description of the Meter Display
The meter display screen contains five fields that are monitored and updated dynamically.
• MODE: operational mode
• DEMD: velocity demand
• RPM: calculated revolutions per minute
• VLTS: motor voltage
• ITOT: total output current
The value or state of each field is shown dynamically in the second column of the display.
Figure 9-59
[MODE] field
The [MODE] field is fixed.
The last four fields on the display contain parameter values that can be defined by the user.
All four variable displays can be selected from a pick list using the display parameters (8000).
The [MODE] field displays the current operational mode of the system.
This field can have any one of the displays summarized in Table Line 1 of mode display
depending on the current operational mode or the current state of the drive.
406
S i e m e n s H a r m o n y
V e r s i o n # . # . # D a t e
Identification/version screen and meter display
Dynamic Programmable Meter Display
NXGPro+ Control Manual
Operating Manual, A5E50491925A