Table of Contents
Advertisement
NOTE
Front Panel Operation
Operation
To Open All Switches
1. Press the
key.
Open All
2. Press the arrow key to display YES, then press the
Status after this operation
When the bias mode is ON, the bias-enabled output ports will be connected to the
input bias port.
When the ground mode is ON, the ground-enabled input/output ports will be
connected to the input ground port.
To Save/Load Setup Data
The Agilent B2200 provides the internal memory used to save the setup condition.
Eight setup conditions can be saved into the memory.
To save the setup
1. Press the
key and the
Shift
2. Press the arrow key to select the internal memory (01 to 08).
3. Press the
key to save the setup. Or press the
Enter
operation.
Wait until the save operation is completed. Then, the LCD displays the status
and setup conditions.
To load the setup
1. Press the
Load Memory
2. Press the arrow key to select the internal memory (01 to 08).
3. Press the
key to load the setup. Or press the
Enter
operation. Wait until the load operation is completed. Then, the LCD displays
the status and setup conditions.
3-6
key.
Load Memory
key.
Agilent B2200 User's Guide, Edition 2
key.
Enter
key to cancel this
Exit
key to cancel this
Exit
Advertisement
Table of Contents
