WAGO 752 Owner's Manual page 37

4. Add a slave remote bus device
The network structure can be automatically detected by right-clicking on the
configuration frame icon, and selecting the menu item "Read Again". Perform
a manual configuration if you wish to document the project with device spe-
cific icons and/or descriptors.
Right-click on the controller board icon and select the menu item "Insert with
ident code..." to manually insert a device into the network configuration.
Fig. 7-13: Insert remote bus device
Once inserted, further information relating to the device can be entered in the
"Insert Device Description" dialog. An icon can be selected for the device by
clicking the command button "Icon..."..
i
Further information
Ask WAGO for the icons of the WAGO devices. They are available on floppy
disc or via the WAGO INTERNET webside.
http://www.wago.com
Fig. 7-14: Device description
Fieldbus Dependent I/O Module
INTERBUS
INTERBUS • 33
p932x16e
p932x13e