Description - WAGO 752 Owner's Manual

7.1.2 Description

Physically, the bus is structured as point-to-point connections between the
slaves. Each slave possesses an "incoming" bus and an "outgoing" bus.
Fig. 7-1: INTERBUS, remote bus topology
Possible configuration:
• Fieldbus master :
• Fieldbus equipment:
Fieldbus Dependent I/O Module
INTERBUS
Remote bus
Master
Remote bus
device
Bus coupler
Remote bus
device
Remote bus
device
WAGO-I/O-SYSTEM 758, PC interface PCB INTERBUS-Master
INTERBUS-Master of other manufacturers
WAGO-I/O-SYSTEM 750, modular I/O system, digital and analog I/O
WAGO-I/O-SYSTEM 752, digital I/O modules
WAGO-I/O-SYSTEM 755, digital I/O modules (IP67)
Remote bus segment
Remote bus
device
INTERBUS
Remote bus
device
• 25
g112200e