Standard Controller Functions - Wine Guardian TTW018 Installation, Operation And Maintenance Manual

Standard Controller Functions

"Cool" Symbol
"Heat" Symbol
Settings and
Defrost Area
Temperature
On/Off Button
How to:
Turn system
on/off
Change
temperature
Change
humidity
Change Settings
Cooling/
Heating / Auto
31
Up Button
Down Button Settings Button

Press the "On/Off" button once.
Note: There is a five (5) minute time delay
before the system turns on or turns off.

Press the "Up" arrow once. The display
will show the existing temperature
setpoint.

Press the up or down arrow buttons to
adjust the temperature to the desired set
point.

Press the "Up" arrow once. This display
will show the existing temperature
setpoint.

Press the "Settings" button once to display
the "Humidity" setpoint.

Press the "Up" or "Down" arrows to adjust
the humidity to the desired set point.
Note: A Wine Guardian humidifier must
be installed and Setting 6 set to "1" or "2"
before the controller will let you change
percent humidity.

Press the Setting button once to display the
setting function at the bottom of the
screen.

Press the Settings button again to scroll
through settings for cool only, heat only or
heat/cool only – auto mode.
Alarms
Battery Life
Humidity