Receiving, Inspecting And Unpacking The Wine Guardian System; Review The Packing Slip To Verify; Check The Unit For - Wine Guardian TTW018 Installation, Operation And Maintenance Manual

Receiving, Inspecting and Unpacking the Wine
Guardian System
NOTE: Wine Guardian systems are factory assembled and tested prior to
shipment.
Wine Guardian systems are shipped individually in corrugated boxes specially designed to
protect the equipment during shipment.
✓ Before opening the container, inspect the packing crates or boxes for obvious signs
of damage or mishandling.
✓ Write any discrepancy or visual damage on the bill of lading before signing.
✓ Inspect all equipment for any sign of damage caused during transit.
✓ Report all visual or concealed damage to the carrier and file a claim immediately.
✓
If this procedure is not followed, the shipping company may reject the
claim and the consignee may suffer the loss. Do not return the shipment
* DO NOT LIFT THE UNIT UP FROM ITS PLASTIC FRONT PIECES
**THE UNIT SHOULD BE LIFTED FROM UNDERNEATH ITS BASE AT

Review the Packing Slip to Verify:

✓ Model number
✓ Factory-installed options
✓ System accessories
If any items listed on the packing slip do not match your order information, contact the place
of purchase immediately.
Check the unit
✓ An electrical power cord (factory installed on condenser side)
✓ The Easy Mount™ Through-the-Wall mounting sleeve.
✓ Accessories such as condenser air duct collar or duct collar kit, and optional controls, if
ordered.
6
IMPORTANT
to the factory.
TO AVOID DAMAGING THEM
BOTH ENDS OF THE SYSTEM.
for:
WARNING