Standard Controller Functions - Wine Guardian WGS40 Installation, Operation And Maintenance Manual

STANDARD CONTROLLER FUNCTIONS

Humidity
Temperature
"Heat" symbol
Settings Area
How to:
Turn system on/off
Change Temperature
Change Humidity %RH
53
Up Button
Down Button
Settings button (right side)
On/Off (left side)
"Cool" symbol
 Press the On/Off" button once.
Note: There is a five (5) second
time delay before the system
turns on or turns off.
 Press the "Up" arrow once. The
display will show the existing
temperature set point.
 Press the up or down arrow
buttons to adjust the temperature
to the desired set point.
 Press the "Up Arrow" once. This
display will show the existing
temperature set point.
 Press the "Settings" button once
to display the Humidity setpoint.
 Press the "Up" or "Down"
arrows to adjust the humidity to
the desired set point. Note – a
Wine Guardian humidifier must
be installed and setting six (6)
set to "1" or "2" before the
controller will let you change
percent humidity.