Wine Guardian TTW018 Installation, Operation And Maintenance Manual page 37

Thermistor 4
Reserved
Output test
Reserved
Default
temperature
Default %RH
Default mode
37
Setting 43

Press "Settings" button to advance to
Setting 43.
No setting adjustment.
Displays the defrost sensor temperature.
Setting 44-49
Reserved for additional fields.
Setting 50

Press "Settings" button to advance to
Setting 50.

Press the "Up" or "Down" buttons to
adjust to the desired setpoint.
Steps through relays as output test.
0 = Disabled
1 = Enabled
Setting 51-69
Reserved for additional fields.
Setting 70

Press "Settings" button to advance to
Setting 70.
No setting adjustment.
Initial temperature set point. Will revert to
this setting upon loss of power.
Setting 71

Press "Settings" button to advance to
Setting 71.
No setting adjustment.
Initial relative humidity set point. Will
revert to this setting upon loss of power.
Setting 72

Press "Settings" button to advance to
Setting 72.

Press the "Up" or "Down" buttons to
adjust to the desired setpoint.
Initial mode set point. Will revert to this
setting upon loss of power.
1 = Auto
2 = Cool
3 = Heat