Standard Controller Functions - Wine Guardian D050 Installation, Operation And Maintenance Manual

Standard Controller Functions

Humidity
Temperature
Alarm Indication
Area
Mode Area
How to:
Turn system on/off
Change temperature
Change humidity
Change mode --
Cooling/Heating/Auto
36
Up Button
Down Button
Mode button (right side)
On/Off (left side)
 Press the "On/Off" button once. Note:
There is a five (5) second time delay before
the system turns on or turns off.
 Press the "Up" arrow once. The display will
show the existing temperature setpoint.
 Press the "up or down" arrow buttons to
adjust the temperature to the desired
setpoint.
 Press the "Up" arrow once. This display
will show the existing temperature setpoint.
 Press the "Mode" button once to display the
"Humidity" setpoint.
 Press the "Up" or "Down" arrows to adjust
the humidity to the desired set point. Note –
a Wine Guardian humidifier must be
installed and Setting 6 set to "1" or "2"
before the controller will let you change
percent humidity.
.
 Press the "Mode" button once to display the
"Set" function at the bottom of screen. The
existing mode will display next to the word
"Set" at the bottom of the screen.
 Press the mode button again to scroll
through settings for "Cool" (cooling only),
"Heat" (heating only) or "Heat Cool"
(Auto).