Planning The Installation - Wine Guardian TTW018 Installation, Operation And Maintenance Manual

✓ This equipment is heavy. Place the unit on the floor or on a level and stable
surface that can support the full weight of the unit.
✓ Do not modify the equipment, it may cause damage to the equipment and voids
the warranty.
✓ Never place anything on top of the unit.
✓ Never block or cover any of the openings or outlets to the unit.
✓ Never allow anything to rest on or roll over the power cord.
✓ Never place the unit where the power cord is subject to wear or abuse.
✓ Do not use extension cords.
✓ Never overload wall outlets.
✓ Do not remove or open any cover unless the unit is turned off and the power
cord is plugged in.
✓ Use only dedicated power outlet boxes of the correct capacity and configuration
for the unit model.
Improper installation may result in the equipment malfunctioning and a safety hazard. Read all of
the installation instructions before installing the Wine Guardian unit

Planning the Installation

Tools required
Drill/Phillips head
Urethane caulk
22
RISK OF PERSONAL INJURY OR DAMAGE TO EQUIPMENT
Modification to the equipment may cause injury or damage
RISK OF PERSONAL INJURY OR DAMAGE TO EQUIPMENT
Level Stud finder
Hand saw Drywall saw
WARNING
to the equipment
.
DANGER
CAUTION
Tape measure Square
Heavy duty
s
nap knife
Drywall screws