Standard Controller Functions - Wine Guardian Sentinel Series Installation, Operation And Maintenance Manual

Standard Controller Functions

"Cool" Symbol
"Heat" Symbol
Settings and
Defrost Area
Temperature
On/Off Button
Button
How To:
Turn system
on/off
Change
temperature
Change
humidity
Change
Settings
Cooling/
Heating / Auto
41
Up Down Button
Button
• Press the "On/Off" button once. Note:
There is a five (5) minute time delay before
the system turns on or turns off.
• Press the "Up" arrow once. The display will
show the existing temperature setpoint.
• Press the up or down arrow buttons to
adjust the temperature to the desired set
point.
• Press the "Up" arrow once. This display will
show the existing temperature setpoint.
• Press the "Settings" button once to display
the "Humidity" setpoint. • Press the "Up" or
"Down" arrows to adjust the humidity to the
desired set point.
Note: A Wine Guardian humidifier must be
installed and Setting 6 set to "1" or "2"
before the controller will let you change
percent humidity.
• Press the Setting button once to display the
setting function at the bottom of the screen.
• Press the Settings button again to scroll
through settings for cool only, heat only or
heat/cool only (auto mode).
Alarms
Battery Life
Humidity
Settings