Installing The Optional Remote Interface Controller And Communication Cable - Wine Guardian TTW018 Installation, Operation And Maintenance Manual

Through-the-wall wine cellar cooling systems
Table of Contents

Advertisement

Installing the Optional Remote Interface Controller and
Communication Cable
ways:
Wired (recommended)
communication cable. 50' (15.25 meters) of control cable is included with each controller with
longer lengths available as an option.
Whenever possible we strongly suggest wiring the Remote Interface Controller directly to the Wine Guardian
Wirelessly -
connects wirelessly to the Wine Guardian unit by Radio Frequency connectivity
through one of twelve selectable channels.
Wireless installation may result in limited communication range and connectivity issues depending upon
building construction and distance between Wine Guardian unit and Remote Interface Controller and/or
The Wine Guardian Wireless-to-base Remote Interface Controller is a configurable device that
can be fine-tuned through a series of individual settings. The controller eight (8) key
temperature, humidity and system alarm points. Remote alarm indication is possible through
terminal point connections at our main control board.
In most applications, the remote interface controller will be mounted within the wine cellar. The
remote interface controller can also be mounted directly outside of the wine cellar or in any other
room of the home or building. When mounted outside of the wine cellar, a remote sensor kit or a
second wireless remote interface must be purchased and installed within the wine cellar.
Regardless of wired or wireless each, Wine guardian System can have a maximum of two (2) Remote Interface
Additional Remote Interface:
40
The Wine Guardian Wireless-to-base Remote Interface
Controller is a combination temperature and humidity
controller with single stage cooling, heating and humidity
control. It's capacitive touch screen incorporates an on/off
switch, adjustment arrows and settings buttons for ease of use
and programming. The controller can be installed one of two
– wired directly to the Wine Guardian unit through an RJ-9
unit to avoid periodic battery changes and uninterrupted service.
Controllers and three (3) Remote Sensors.
IMPORTANT
IMPORTANT
Remote Sensors.
IMPORTANT

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ttw009Ttw009hWg15Wg25Wg25h

Table of Contents