酒卫的启动和运营; Starting-Up And Operating The Wine Guardian; 控制设定; Control Settings - Wine Guardian WG15 Installation, Operation And Maintenance Manual

Through-the-wall wine cellar cooling systems
Table of Contents

Advertisement

酒卫的启动和运营

Starting-up and Operating the Wine Guardian

控制设定

Control Settings

The control has been wired and set up in the factory for testing with default settings. It is an
electronic digital thermostat for one-stage cooling. No additional adjustments should be
necessary except adjusting the cellar temperature to your preference. If additional adjustments
or changes are necessary, please refer to the configuration settings section in this manual.
控制器功能

Controller Functions

开/关–"开/关"按钮将用于打开或关闭系统。当设置为关闭模式时,控制器将不允许任何输
出通电以有效锁定系统。在使用 ON / OFF 按钮打开系统之前,不允许任何输出通电。应
该注意的是,即使控制系统不允许将其切换到输出,当系统设置为关闭时,主控制板上仍
会存在高压。
ON/OFF – The ON/OFF button will be used to turn the system on or off. When set to the off
mode the control will not allow any of the outputs to energize effectively locking the system out.
It will not allow any outputs to energize until the system is turned on with the ON/OFF button. It
should be noted that high voltage will still be present at the main control board when the system is
set to off even though the control will not allow it to switch to the outputs.
向上箭头–向上箭头将允许用户增加设置。
UP Arrow – The UP arrow will allow the user to increase settings.
向下箭头–向下箭头将允许用户减少设置
DOWN Arrow – The DOWN arrow will allow the user to decrease settings.
设置–设置按钮将用于在加热,冷却和自动模式之间进行选择,以及输入配置设置。按住
SETTINGS 按钮 5 秒钟将进入配置模式。进入配置模式后,用户可以通过按 UP 或 DOWN
39
该控件已布线,并已在出厂时设置为使用默认设置进行测试。
它是一种用于一级冷却的电子数字恒温器。除了根据您的喜好
调节酒窖温度外,无需进行其他调节。如果需要进行其他调整
或更改,请参阅本手册中的"配置设置"部分

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wg25

Table of Contents