Standard Controller Functions
Alarm Indication
Area
Temperature
ON/OFF
Settings – Press and hold the "Mode" button for five (5) seconds to access the following settings.
How to:
Turn system on/off
Change Temperature
Change Humidity
Change Mode --
Cooling/Heating/Auto
32
Humidity
Up Button
Down Button
Mode button
Press the On/Off" button once.
NOTE: There is a five- second time
delay before the system turns on or turns
off.
Press the "Up" arrow once. The display will
show the existing temperature setpoint
along with the "Mode" (Auto, Cool or
Heat).
Press the "Up" or "Down" arrow buttons to
adjust the temperature to the desired
setpoint.
Press the "Up Arrow" once. This display
will show the existing temperature setpoint.
Press the "Mode" button once to display the
Humidity setpoint.
Press the "Up" or "Down" arrows to adjust
the humidity to the desired setpoint.
NOTE: a Wine Guardian humidifier
must be installed and setting six set to
"1" before the controller will display and
let you change percent
Press the "Mode" button once to display the
"Set Mode" function. The existing mode
will display below the words "Set Mode."
Press the "Mode" button again to scroll
through settings for "Cool" (cooling only),
"Heat" (heating only) or "Auto" (cool and
heat).
humidity.