Printing The Oscilloscope's Display; Print Options - Agilent Technologies InfiniiVision 6000 Series User Manual

7 Saving and Printing Data

Printing the oscilloscope's display

N O T E

Print options

316
To print the oscilloscope's display:
1 Connect a USB printer to either the USB port on the front
panel or the rectangular USB host port on the rear panel. A
list of supported printers is on
2 Press the Print key (labeled Quick Print on older models) on the
front panel.
3 Press the Press to Print softkey.
The Print function remembers the screen you were on before you pressed
the print key. The last menu visited will be shown in the printout.
Therefore, if you have measurements (Amplitude, Frequency, etc.)
showing on the display before you select Print, the measurements will be
shown on the printout.
To print the display showing the Print Configuration Menu at the bottom,
press the Print key twice, then press the Press to Print softkey.
You can print scale factors, print in color or grayscale, and
choose whether to print the waveform on a separate sheet of
paper (form feed) from the factors (if factors are selected). To
conserve printer ink, you can invert the graticule colors so that
the background is white instead of black.
The Print Configuration menu is displayed when you press the
Print key. The print option softkeys and the Press to Print softkey
are ghosted (not available) until a printer is connected.
Choose Options:
printer Factors,
Invert,
Form Feed
page
Select
Color or
Grayscale
6000 Series Oscilloscope User's Guide
318.
Prints the
waveform