Print (Screens); To Print The Oscilloscope's Display - Agilent Technologies InfiniiVision 2000 X-Series User Manual

You can print the complete display, including the status line and softkeys,
to a USB printer or a network printer when the DSOXLAN LAN/VGA
module is installed.
The Print Configuration Menu is displayed when you press the [Print] key.
The print option softkeys and the Press to Print softkey are ghosted (not
available) until a printer is connected.

To print the oscilloscope's display

1 Connect a printer. You can:
2 Press the [Print] key on the front panel.
3 In the Print Configuration Menu, press the Print to softkey; then, turn
Agilent InfiniiVision 2000 X-Series Oscilloscopes
User's Guide
18

Print (Screens)

To print the oscilloscope's display
To set up network printer connections
To specify the print options
To specify the palette option
• Connect a USB printer to either the USB port on the front panel or
the rectangular USB host port on the rear panel.
For the most up- to- date listing of printers that are compatible with
the InfiniiVision oscilloscopes, please visit
"www.agilent.com/find/InfiniiVision-
• Set up a network printer connection. See
connections" on page 232.
the Entry knob to select the desired printer.
231
234
235
printers".
s1
232
"To set up network printer
231