Agilent Technologies InfiniiVision 6000 Series User Manual page 27

6000 Series Oscilloscope User's Guide
Model Description
N2782A Current probe, 50 MHz, 30 A, AC/DC (use with N2779A power
supply)
N2783A Current probe, 100 MHz, 30 A, AC/DC (use with N2779A power
supply)
10072A Fine-pitch probe kit
10075A 0.5 mm IC clip kit
10076A 100:1, 4 kV 250 MHz probe
E2613B 0.5 mm Wedge probe adapter, 3-signal, qty 2
E2614A 0.5 mm Wedge probe adapter, 8-signal, qty 1
E2615B 0.65 mm Wedge probe adapter, 3-signal, qty 2
E2616A 0.65 mm Wedge probe adapter, 8-signal, qty 1
E2643A 0.5 mm Wedge probe adapter, 16-signal, qty 1
E2644A 0.65 mm Wedge probe adapter, 16-signal, qty 1
†
Indicates a maximum of two of this model probe can be connected to each
oscilloscope due to AutoProbe interface current supply limitation. See also
"Passive Probes Supported"
"Active Probes Supported"
You can find these items at www.agilent.com or at www.parts.agilent.com.
For information on more probes and accessories see
"5989-6162EN Probes and Accessories Selection Guide" and
"5968-8153EN 5000 and 6000 Series Oscilloscope Probes and
Accessories data sheet, available at www.agilent.com.
on page 55 and
on page 56.
Getting Started 1
27