Interpreting The Display - Agilent Technologies InfiniiVision 6000 Series User Manual

Interpreting the display

Analog
channel
sensitivity
Status line
Analog
channels and
ground levels
Trigger Level
Digital
channels
Measurement
line
Softkeys
6000 Series Oscilloscope User's Guide
The oscilloscope display contains acquired waveforms, setup
information, measurement results, and softkeys for setting up
parameters.
Trigger point, Delay
time reference time
Figure 8 Interpreting the display
Status line
The top line of the display contains vertical,
horizontal, and trigger setup information.
Display area
The display area contains the waveform
acquisitions, channel identifiers, and analog trigger and ground
level indicators. Each analog channel's information appears in a
different color.
Measurement line
This line normally contains automatic
measurement and cursor results, but can also display advanced
trigger setup data and menu information.
Softkeys
The softkeys let you set up additional parameters for
the selected mode or menu.
Front-Panel Controls
Sweep Run/Stop Trigger
speed mode type
2
Trigger
source
Trigger level
or digital
threshold
Cursor
markers
defining
measurement
75