To Power-On The Oscilloscope; Ac-Powered 6000 Series; Battery-Powered 6000A Series - Agilent Technologies InfiniiVision 6000 Series User Manual

To power-on the oscilloscope

AC-Powered 6000 Series

WA R N I N G

Battery-Powered 6000A Series

6000 Series Oscilloscope User's Guide
1 Connect the power cord to the rear of the oscilloscope, then
to a suitable AC voltage source.
The oscilloscope automatically adjusts for input line voltages
in the range 100 to 240 VAC. Ensure that you have the correct
line cord. See Table 8
matched to the country of origin.
Always use a grounded power cord. Do not defeat the power cord
ground.
2 Press the power switch.
The power switch is located on the lower left corner of the
front panel. Some front panel lights will come on and the
oscilloscope will be operational in a few seconds.
54684A
Oscilloscope
54684e82
Figure 4 Additional indicators on battery-powered 6000A Series
on page 37. The line cord provided is
1 GHz
4 GSa/s
Main
Delayed
Quick Acquire Display
Cursors
Meas
Save Quick
Auto- Utility
Print
Scale Recall
Digital Analog
Select
D15
1 2 3
Thru Math Label
D0
AC AC AC
BW BW BW
50 50 50
Position
~ ~
1 2 1 M 14pF 3
300 V RMS
X Y
CAT I
50 5 V RMS
Getting Started 1
Run
Single
Stop
Mode
Edge
Coupling
More
Pulse Pattern
Width
4
AC
BW
50
4
Z
33