6
Displaying Data
To decode SPI data
N O T E
N O T E
276
Because of oscilloscope hardware resource limitations, you cannot
decode SPI data while CAN or LIN triggering is selected.
For SPI triggering setup see
1 Select the SPI serial decode mode:
a Press the Acquire key.
b Press the Serial Decode softkey.
Display
Decode
decode
mode
c In the Serial Decode Menu, press the Mode softkey.
d Use the Entry knob (or repeatedly press and release the
Mode softkey) to select the SPI serial decode mode.
page
182.
Signal
SPI word
setup menu
size
6000 Series Oscilloscope User's Guide
Return to
previous menu