Voltage Measurements - Agilent Technologies InfiniiVision 6000 Series User Manual

Voltage Measurements

6000 Series Oscilloscope User's Guide
Source 1
Source 2
1 Press the Settings softkey to select the source 1 and source 2
channels for the phase measurement.
The default Phase settings measure from channel 1 to
channel 2.
The example below shows a phase measurement between the
channel 1 and the math d/dt function on channel 1.
Figure 40
Measurement units for each input channel can be set to Volts or
Amps using the channel Probe Units softkey. A scale unit of U
(undefined) will be displayed for math function 1-2 and for d/dt,
Period
Delay
Phase Measurement
Making Measurements 5
249