Agilent Technologies InfiniiVision 6000 Series User Manual page 220

5 Making Measurements
Channel 1
d/dt waveform
220
• Offset —lets you set your own offset for the dV/dt math
function. The offset value is in units/second where units
can be V (Volts), A (Amps), or W (Watts) and is
represented by the center horizontal grid line of the
display. Press the Offset softkey, then turn the Entry knob
to change the offset for d/dt.
A scale unit of U (undefined) will be displayed for scale and
offset when 1-2 or 1+2 is the selected source if channel 1 and
channel 2 are set to dissimilar units in the channel Probe Units
softkey.
The figure below shows an example of differentiate.
Math
Source
Function
select
Figure 29 Differentiate
d/dt
d/dt
Scale Offset
6000 Series Oscilloscope User's Guide