Chapter 1. Introduction; References; Abbreviations And Definitions - Nvidia Jetson AGX Xavier Series Design Manual

Chapter 1. Introduction

This design guide contains recommendations and guidelines for engineers to follow to create
a product that is optimized to achieve the best performance from the interfaces supported by
the NVIDIA Jetson AGX Xavier
®
This design guide provides detailed information on the capabilities of the hardware module,
which may differ from supported configurations by provided software. Refer to software
release documentation for information on supported capabilities.
Note: References to Jetson AGX Xavier applies to any of the Jetson AGX Xavier series of modules
including Jetson AGX Xavier Industrial (JAXi) except where explicitly noted.
Refer to the following documents or models listed for more information. Always use the latest
revision of all documents.
Jetson AGX Xavier Series Module Data Sheet

Xavier Series Processors Technical Reference Manual

Jetson AGX Xavier Series Developer Kit Carrier Board Specification

Jetson AGX Xavier Series Module Pinmux

Jetson AGX Xavier Series Thermal Design Guide

Jetson AGX Xavier Series Developer Kit Carrier Board Design Files

Jetson AGX Xavier Series Developer Kit Carrier Board BOM

Jetson AGX Xavier Series Supported Component List

1.2

Abbreviations and Definitions

Table 1-1 lists abbreviations that may be used throughout this document and their definitions.
Jetson AGX Xavier Series Product
series System-on-Module (SOM).
™
DG-09840-001_v2.5 | 1