Oracle X9-2 Owner's Manual page 40

Storage shelves must be installed below the server nodes to prevent the rack from
tipping.
Open the storage shelf rail kit box and find the cage nut packets included with the kit, and
2.
confirm if your rack uses square or round holes.
The cage nut packets include a special template for either round or square hole racks for
positioning the cage nuts.
Note:
The following steps show rail kit installation with a square hole rack. The same
steps would apply for a round hole rack.
The following figure shows the rack rail installation kit contents:
Callout
1
2
3
4
5
6
Installing the System Into a Rack
Description
Two adjustable storage shelf rails
Cage nut installation template
Six rear 10-32 7mm shipping screws (2 are
spares)
Four round 7mm 10-32 cage nuts per set (2 are
spares). Only one set is required, either square
or round.
Cage nut tool
Four square 9.5mm 10-32 cage nuts per set (2
are spares). Only one set is required, either
square or round.
Chapter 4
4-13