Table of Contents
Advertisement
Installation and Operation Guide SOLECTRIA® PVI 25TL-208, PVI 50TL-480 and PVI 60TL-480
The anti-theft padlock shackle should meet the requirements of the dimensions shown in Figure 3-18.
Electrical Installation
Electric Shock Hazard: Components with hazardous voltage and energy will electrocute operator. Operator shall
avoid touching live components with hazardous voltage and energy. Verify the absence of voltage using an
appropriately rated multimeter.
Always Wear Proper PPE: The proper Personal Protective Equipment (PPE) must be worn while working in close
proximity of hazardous voltage and energy.
Conduit Installation: All conduit connections must be made in such a way as to maintain the NEMA rating of the
enclosure. Failure to maintain the NEMA rating will void the warranty.
Turn AC Switch to OFF: Verify the absence of AC voltage prior to terminating any conductors.
DOCR-071030-A (10/7/2022)
Figure 3-17 Location of Anti-Theft Padlock Hole
B
C
Recommended lock size:
A
B: Shackle width 20~50mm
C: Shackle height 20~50mm
Figure 3-18 Acceptable Dimensions for Anti-Theft Padlock
DANGER
WARNING
A: Shackle diameter 3~6mm
Page 39 of 131
Hide quick links:
Advertisement
Table of Contents
