YASKAWA Solectria PVI 25TL-208 Installation And Operation Manual page 75

Installation and Operation Guide SOLECTRIA® PVI 25TL-208, PVI 50TL-480 and PVI 60TL-480
Please check with your local electricity supply company before selecting the grid standard. If the inverter is
operated with a wrong grid standard, the electricity supply company may cancel the operation license. Putting
the inverter into operation before the overall system complies with the national rules and safety regulation of
the application is not permitted.
PV I M
(3)
NPUT ODE
(4) N L S
EUTRAL INE
setting does not affect the operation of the inverter. When a neutral is installed and "Yes" is selected, the
inverter will display L-N measurements.
C
(5) S : In this interface you can set the address and baud rate for communication.
OM ETTING
(6) T : Press "
IME
Finally Press ENT to confirm your selection.
(7) LCD C
ONTRAST
changes.
There are 5 submenus in the
(1) F R
ORCE ESTART
The user can perform a manual/forced reboot once using this menu if the user needs to restart the
inverter.
DOCR-071030-A (10/7/2022)
Figure 6-5 G
:
The inverter can work only under "Independent Mode"
: Select Yes or No if a neutral conductor has been connected to the inverter. This
ETTING
" or "
" set the value, then press ENT to move to the next option. e.g.: Year to Month.
S : Press or
ETTING
Control Command
C C
ONTROL OMMAND
menu: If a fault shutdown happens, a severe fault may have occurred inside the inverter.
C R
RID ONNECTION ULE
INFO ✔
to increase/decrease the LCD contrast. Press ENT to accept
:
Page 75 of 131