YASKAWA Solectria PVI 25TL-208 Installation And Operation Manual page 97

Installation and Operation Guide SOLECTRIA® PVI 25TL-208, PVI 50TL-480 and PVI 60TL-480
the cursor to "ON" and press ENT to start the inverter. The inverter will start up and operate normally if the start-
up conditions are met. Otherwise, the inverter will go to stand-by mode.
Normally, it is not necessary to Turn OFF the inverter, but it can be shut down manually if regulation setting or
maintenance is required. Move the cursor from the main operation interface to POWER ON/OFF and press ENT.
Move the cursor to "OFF" and press ENT, and then the inverter will be shut down.
The inverter will start up automatically when the output voltage and power of PV arrays meet the set value, AC
power grid is normal, and the ambient temperature is within allowable operating range.
The inverter will be shut down automatically when the output voltage and power of PV modules are lower than
the set value, the AC power grid fails, or the ambient temperature exceeds the normal range.
History Record
H
Move the cursor to
ISTORY
are 3 submenus in the
6-18.
C E
This log will display any faults that are currently affecting the operation of the inverter.
URRENT RROR
DOCR-071030-A (10/7/2022)
Automatic Power ON/OFF
R M
in the
ECORD AIN
H R menu:
ISTORY ECORD
History Record
Current Error
Running Record
Fault Record
Figure 6-18 History Submenu
M interface. Press ENT to check the historical records. There
ENU
C E , R
URRENT RROR UNNING
Current Error
Date
2015/10/22 12:20:08
2015/10/22 12:20:08
2015/10/22 12:20:08
2015/10/22 12:20:08
2015/10/22 12:20:08
Running Record
Num Date
001 15/10/22 12:20:08
002 15/10/22 12:20:08
003 15/10/22 12:20:08
004 15/10/22 12:20:08
005 15/10/22 12:20:08
006 15/10/22 12:20:08
Fault Record
Num Date
001 15/10/22 12:20:08
002 15/10/22 12:20:08
003 15/10/22 12:20:08
004 15/10/22 12:20:08
005 15/10/22 12:20:08
R and F R
ECORD AULT ECORD
Time Fault
ArcboardErr
Fault0040
Fault0040
Fault0040
Fault0040
P1/1
Time
Event
Fault
Standby
Running
Standby
Fault
Checking
P1/1
Time Event Fault
ArcboardErr
ON
Fault0040
ON
Fault0040
ON
Fault0040
ON
Fault0040
ON
P1/1
. See Figure
Page 97 of 131