YASKAWA Solectria PVI 25TL-208 Installation And Operation Manual page 8

Installation and Operation Guide SOLECTRIA® PVI 25TL-208, PVI 50TL-480 and PVI 60TL-480
Operator may contact components with hazardous voltage and energy. Use proper safety equipment including
Personal Protective Equipment (PPE) when de-energizing the unit. De-energize both the AC and DC power from
the unit, wait 5 minutes, and verify the absence of voltage before opening the equipment or removing any
protective shields.
Unqualified Operator Hazard: Operator may cause a hazardous situation by making incorrect installation or
wiring connections. A qualified technician shall do all installation and wiring connections to comply with all local,
national, and country specific guidelines for safety.
Risk of electric shock and fire: Use only with PV modules that have a maximum system voltage of rating of
1000VDC or higher
Electrical Shock Hazard: The DC conductors of this photovoltaic system are normally ungrounded but will
become intermittently grounded without indication when the inverter performs the PV array isolation
measurement.
Chemicals Hazard: This product can expose you to chemicals including lead, known to the State of California to
cause cancer and birth defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
Heavy Lifting Hazard: Solectria PVI 25TL-208, PVI 50TL-480, and PVI 60TL-480 inverters weigh 56 kg (123.5 lbs).
The wiring box weighs 15 kg (33 lbs). Ensure the mounting bracket is properly installed prior to hanging the
inverter and wiring box on the bracket. A team of more than two is recommended to lift and place the inverter
and wiring box into position.
General Damage to Equipment: Attempting to service the inverter improperly may result in damage. Contact
Yaskawa Solectria Solar Technical Support for maintenance.
Use as Intended: Solectria PVI 25TL-208, PVI 50TL-480, and PVI 60TL-480 inverters are designed for PV grid-tied
systems. The inverters are to be installed with floating or ungrounded PV arrays only.
Read and Follow Instructions: Failure to read and follow instructions may void the warranty. Install the inverter
according to the instructions in this manual.
Grid Standard: Please check with the local electric utility supply company before selecting a grid standard. If the
inverter is operated with an incorrect grid standard, the electric utility supply company may cancel the
DOCR-071030-A (10/7/2022)
WARNING
CAUTION
NOTICE!
INFO ✔
Page 8 of 131