YASKAWA Solectria PVI 25TL-208 Installation And Operation Manual page 74

Installation and Operation Guide SOLECTRIA® PVI 25TL-208, PVI 50TL-480 and PVI 60TL-480
Move the cursor to S
ETTINGS
password: "1111"as shown Figure 6-3. Change the password digits by pressing
input the next digit and Press ENT to confirm the password or Press ESC return back to setting.
Press ENT to confirm, and set the current system parameters, as shown in Figure 6-4. There are 8 submenus in
S
Parameters Setting:
YSTEM
A D S
CTIVE ERATING ETTING
Setting
System Parameters
Control Command
Protection Parameters
LVRT/HVRT Setup
Power Derating Setup
Reactive Power Derating Setup
ARC Parameters
The System Parameter selection contains seven submenus.
(1) L S
ANGUAGE ETTING
(2) G C
RID ONNECTION
grid standard required for the installation and press the ENT key to confirm the selection as shown in
Figure 6-5.
DOCR-071030-A (10/7/2022)
in the main interface. Press ENT, you will be asked for a password. Enter the
Password
Figure 6-3 Password Screen for Settings Menu
P C
,
ARAMETERS ONTROL
, R D S
EACTIVE ERATING ETTING
Figure 6-4 System Settings Menu
System Parameters
: Two languages, i.e. English and Chinese is available in
R : There are multiple grid standards. Press
ULE
Please enter password:
0 0 0 0
P1/1
C P
,
OMMAND ROTECTION
, ARC P , and
ARAMETERS
Setting
Others Parameters
P1/2
. Then press ENT to
and
P L/HVRT P
,
ARAMETERS
O P .
THER ARAMETERS
P2/2
L menu.
ANGUAGE
and to select the corresponding
,
ARAMETERS
Page 74 of 131