Calendars - Carrier TruVu VVTBP-E2 Installation And Startup Manual

Ack Required for Off-Normal,
Fault, and Normal
Recipient List
Recipients
Recipient Description
Recipient Type
Days and times
Recipient Device Object
Identifier
Process Identifier
Issue Confirmed
Notifications
Transitions to Send

Calendars

Calendars are provided in the driver for BACnet compatibility only. Instead, use the Schedules feature in the i-Vu®
interface.
TruVu™ VVTBP-E2
Installation and Start-up Guide
Specifies whether alarms associated with this Notification Class require a BACnet
Acknowledgment for Off-Normal, Fault, or Normal alarms.
TIP You can require operator acknowledgment for an Alarm or Return-to-
normal message (stored in the i-Vu® database). In the i-Vu® interface on the
Alarm > Enable/Disable tab, change the acknowledgment settings for an alarm
source or an alarm category.
The first row in this list is from the i-Vu® application. Do not delete this row. Click
Add if you want other BACnet devices to receive alarms associated with this
Notification Class.
NOTE Additional entries in this table may be lost after a download.
Name that appears in the Recipients table.
Use Address (static binding) for either of the following:
•
Third-party BACnet device recipients that do not support dynamic binding
•
When you want alarms to be broadcast (you must uncheck Issue Confirmed
Notifications). This use is rare.
The days and times during which the recipient will receive alarms.
Type the Device Instance from SiteBuilder (or from the network administrator for
third-party devices) in the # field.
Change for third-party devices that use a BACnet Process Identifier other than 1.
The i-Vu® application processes alarms for any 32-bit Process Identifier.
Select to have a device continue sending an alarm message until it receives
delivery confirmation from the recipient.
Uncheck the types of alarms you do not want the recipient to get.
47
Adjusting the TV-VVTBP-E2 driver properties
©2022 Carrier.
All rights reserved.