Calendars; Common Alarms - Carrier VVT Zone II Installation And Startup Manual

Calendars

Calendars are provided in the driver for BACnet compatibility only. Instead, use the Schedules feature in the i-Vu®
interface.

Common Alarms

On these pages, you can enable/disable, change BACnet alarm properties, or set delays for the following BACnet
alarms:
Common alarms:
•
Module Halted
•
All Programs Stopped
•
Duplicate Address
•
Locked I/O
• Control Program
• Program Stopped
•
Excessive COV
Module Generated Alarm
Description
Events
Alarm Category and Alarm
Template
Enable
Notification Class
VVT Zone II Controller
Installation and Start-up Guide
Short message shown on the i-Vu® Alarms page or in an alarm action when this
type of alarm is generated.
See Alarms in i-Vu® Help.
Clear these checkboxes to disable Alarm or Return to normal messages of this
type from this controller.
Do not change this field.
59
To adjust the driver properties
CARRIER CORPORATION ©2019
All rights reserved