Carrier TruVu VVTBP-E2 Installation And Startup Manual page 18

Mounting the TV-VVTBP-E2
Hold down the actuator release button, rotate the damper to verify that it opens and closes, then release the
9
button.
10 Connect the tube provided to either one of the controller's airflow ports. Using 1/4" poly tubing, connect the
other end to a duct static pressure probe (for example, Dwyer Instruments part #A-491, or the equivalent, for
a 6" length probe) located in the supply air duct downstream of the bypass damper, but before the first
branching of ductwork.
11 Leave the remaining airflow port open if using a ducted return, or connect it to room space if using plenum
return.
TruVu™ VVTBP-E2
Installation and Start-up Guide
12
©2022 Carrier.
All rights reserved.