Calendars; Common Alarms - Carrier VVT Bypass II Installation And Startup Manual

To adjust the driver properties

Calendars

Calendars are provided in the driver for BACnet compatibility only. Instead, use the Schedules feature in the i-
Vu® interface.

Common Alarms

On these pages, you can enable/disable, change BACnet alarm properties, or set delays for the following
BACnet alarms:
Common alarms:
•
Module Halted
•
All Programs Stopped
•
Duplicate Address
•
Locked I/O
• Control Program
• Program Stopped
•
Excessive COV
Module Generated Alarm
Description
Events
Alarm Category and Alarm
Template
Enable
Notification Class
VVT Bypass II Controller
Installation and Start-up Guide
Short message shown on the i-Vu® Alarms page or in an alarm action when this
type of alarm is generated.
See Alarms in i-Vu® Help.
Clear these checkboxes to disable Alarm or Return to normal messages of this
type from this controller.
Do not change this field.
32
CARRIER CORPORATION ©2019
All rights reserved