Carrier TruVu VVTBP-E2 Installation And Startup Manual page 33

Connect binary and analog output wiring to the screw terminals on the TV-VVTBP-E2 and to the controlled
4
device.
Connect the ground wire to the AO outputs' terminals.
5
Turn on the TV-VVTBP-E2's power.
6
See Troubleshooting inputs and outputs (page 71).
TruVu™ VVTBP-E2
Installation and Start-up Guide
27
Wiring inputs and outputs
©2022 Carrier.
All rights reserved.