ITech IT6000C Series User Manual page 89

Value Unit
Offset Unit
Time Unit
Mode
Repeat
End State
Total Point
Keep Time
Value
– List: User-defined waveform
The fields included in the .csv template file are explained as follows:
Model
Firmware
Version
Serial Number
File Type
Waveform Type
Vaule Unit
Slope Unit
Time Unit
Copyright © Itech Electronic Co., Ltd.
The CV priority is set to V, and the CC priority is set to
A.
Offset value unit, CV priority is set to V, CC priority is
set to A.
Time unit, fixed to S.
Indicates the power supply working mode. The CV
priority is set to CV, and the CC priority is set to CC.
Repeat times, the setting range is 1~65535.
Indicates the end state. Last (voltage or current main-
tained at the last point after completion) or Normal
(return to the mode before CDWELL execution after
completion).
The total number of waveform points.
Indicates the pulse width of each point. Range:
0~3600. Unit: seconds.
Voltage or current value at each point.
Device model, keep the default settings without
modification.
Firmware version number, keep the default settings
without modification.
Device serial number, keep the default settings with-
out modification.
File type, keep the default settings without
modification.
Waveform type, keep the default settings without
modification.
The CV priority is set to V, and the CC priority is set to
A.
Slope unit, fixed to S.
Time unit, fixed to S.
Power Supply Function
77