Regulation Tag - ITech IT6000C Series User Manual

Environmental Conditions
Operating temperature
Operating humidity
Storage temperature
Altitude
Installation category
Pollution degree

Regulation Tag

In order to ensure the accuracy of measurement, it is recommended to oper-
ate the instrument half an hour after start-up.
The CE tag shows that the product complies with the
provisions of all relevant European laws (if the year is
shown, it indicates that the year when the design is
approved).
The UKCA tag shows that the product complies with
the provisions of all relevant United Kingdom laws (if
the year is shown, it indicates that the year when the
design is approved).
This instrument complies with the WEEE directive
(2002/96/EC) tag requirements. This attached product
tag shows that the electrical/electronic product cannot
be discarded in household waste.
This symbol indicates that no danger will happen or
toxic substances will not leak or cause damage in nor-
mal use within the specified period. The service life of
the product is 10 years. The product can be used
safely within the environmental protection period; oth-
erwise, the product should be put into the recycling
system.
Copyright © Itech Electronic Co., Ltd.
IT6000C Series User Manual
Requirements
0°C～50°C
20%～80%( non-condensation)
-10°C～70 °C
Operating up to 2,000 meters
II
Pollution degree 2
V