ITech IT6000C Series User Manual page 32

•
Before moving, make sure that the cabinet or stand where the
equipment will be placed has been fixed and meets the load-bear-
ing conditions to avoid tilting and collapsing, causing personnel to
be injured, and equipment broken.
•
Due to the weight of the product, transport by hand should be
avoided where possible. If unavoidable, carry it with two people
and holding the product shell and not external parts (such as han-
dles, electrodes, knobs, etc.).
•
When carrying, be prepared to bear the weight to avoid sprains or
being crushed by heavy objects.
•
Use suitable safety clothing, especially safety shoes, when carrying
the equipment, as due to its weight a fall can have serious
consequences.
After unpacking the cabinet product, if you need to move it to other places, you
must pay attention to the following matters to ensure the safety of equipment
and personnel.
Copyright © Itech Electronic Co., Ltd.
Inspection and Installation
20