ITech IT6000C Series User Manual page 118

lower-
limited
highly-
limited
start
voltage
start
time
end time Test time of end voltage, range:
count
Save To
File
User- Select the user-defined LV123 waveform.
de-
fined
Run Run the presently recalled waveform.
Open Recall the waveform saved inside the
instrument.
Recall
File
Copyright © Itech Electronic Co., Ltd.
Power Supply Function
Range of lower limited operating ca-
pability, includes the following
options:
•
HV_1
•
HV_2a
•
HV_2b
•
HV_3
Range of highly limited operating ca-
pability, includes the following
options:
•
HV_1
•
HV_2a
•
HV_2b
Set the initial output voltage of the in-
strument before the LV123 regulation
waveform test. At the same time, this
value is also the end voltage after the
regulatory waveform test is
completed.
Test time of starting voltage, range:
0~999.999S.
0~999.999S.
Set the number of test repetitions,
ranging from 1 to 65535. The actual
number of test executions = count *
3.
Set the save address of the waveform
file, range: 1~10.
The address of the waveform file,
ranging from 1 to 10.
106