ITech IT6000C Series User Manual page 83

LIST List menu
Run Indicates to enter the List run mode, waiting for the trigger to
run the currently selected List file.
Open Select the List file to open.
USB
Internal
Export Export the internal List file of the instrument to an external
USB flash drive.
File
Name
Edit Edit list program.
CC / CV
Step
Count
Step 1
Value
Step 1
Slope
Step 1
Width
Repeat
End
State
Copyright © Itech Electronic Co., Ltd.
Open the List file in the external USB flash disk.
Load Import the List file from the exter-
nal USB flash disk into the
instrument.
Not-Load Cancel the import operation.
Open the List file stored inside the instrument.
Recall Inner Set the name of the recalled List
File file.
The name of the exported list file. The default suf-
fix is .csv, and the file name can only be a string
of numbers.
Set the operation mode for list program: CC prior-
ity or CV priority.
The total number of steps included in the List
program.
Current value or voltage value setting for Step1.
(The voltage appears when CV priority is se-
lected; the current appears when CC priority is
selected.)
Slope value setting for Step1.
Dwell time setting for Step1. The range is from
0.001 to 864000 in seconds.
Set the number of list file repetitions.
Set the running state after the list program is run-
ning over.
Last After the List program finishes run-
ning, the output is kept as the
Power Supply Function
71