Table of Contents
Advertisement
b. Auto setup 6500K
Set up at 6500K.
The execution of this setup requires the 100% window signal.
c. Auto setup 9300K
Set up at 9300K.
The execution of this setup requires the 100% window signal.
d. Auto setup user data
Give CIE color temperature coordinates, preset brightness value
and black level value and set up using this data.
The execution of this setup requires the 100% window signal.
For coordinates, refer to the instruction manual for ASP-80.
This data can be changed using CHANGE USER DATA. After
the selection of the MENU 6-4 item, pressing the "←→" keys
allows the user data menu to appear.
Allowable setting ranges are as follows.
Brightness:
Raster brightness:
Color temperature (x, y): 0.250 to 0.380 cd/m
e. Measure and memorize white balance data
Measure color temperature data, brightness and raster brightness
that were set in the field.
The measured data can be stored as USER DATA.
f. Measure white balance data
Use this function to measure the brightness or color temperature
of any monitor other than this machine. It makes measurement
in real time and therefore can also serve as an analyzer for color
temperature adjustments.
g. User-set data
User-set data is displayed here.
Memorized here are the factory-set color temperature 6500K,
2
brightness 120 cd/m
and raster brightness 0.01 cd/m
h. Change user data
Change user data using this menu.
Allowable change ranges are as follows.
Brightness (L):
Raster brightness (B):
Color temperature (x, y): 0.250 to 0.380 cd/m
10 to 190 cd/m
2
2
0.01 to 0.99 cd/m
2
2
.
2
10 to 190 cd/m
0.01 to 0.99 cd/m
2
2
(9) Description of MENU 7 functions
MENU7 <AUDIO>
1.LINE/SP CH
2.LED ENABLE
3.LED DIMMER
4.SP MONITOR
5.SP INPUT SEL
SELECT (
a. Select an audio pair channel.
b. Specify whether to display the audio level meter.
c. Set the brightness of the audio level meter.
d. Set the audio monitor output.
e. Set an audio input signal.
a. Select audio pair channels
Select the voices from the embedded analog 2-CH output of
DKM-1051AV or DKM-1051AVD to the speaker built into
HTM-1005R from among CH1/2, CH3/4, CH5/6 and CH7/8.
b. Specify whether to display the audio level meter
Specify whether to display the audio level meter DAM-1054
or 1058 on CH1 to 2/1 to 4/1 to 6/1 to 8.
c. Set the brightness of the audio level meter
Set the brightness of the LED on the audio level meter DAM-
1054/1058 in steps of OFF, LOW, MIDDLE and HIGH.
d. Set the audio monitor output
Specify how to produce the output of an audio pair channel set
in "a" from the speaker.
ODD: An odd channel output only is produced from the
speaker
EVEN: An even channel output only is produced from the
speaker.
MIX: A mono output is produced with ODD and EVEN
channel outputs mixed together.
e. Set an audio input signal.
When an embedded audio-compatible option is mounted, set
the standard pin connector audio input or embedded voice for
the source from which voices are to be output from the speaker.
AUTO:
When an SDI channel is selected, the voice of
the embedded audio input is outputted from the
speaker. When an analog channel is selected,
the voice of the analog input is outputted from
the speaker.
EMBEDDED: The voice output from the speaker is limited to
the voice of the embedded audio input
irrespective of channel selection.
ANALOG:
The voice output from the speaker is limited to
the voice of the analog audio input irrespective
of channel selection.
35
CH1/2
a.
CH1 TO 8
b.
HIGH
c.
MIX
d.
AUTO
e.
) EXIT (ESC)
Advertisement
Table of Contents
