Ikegami HTM-1917R Operation Manual
  1. Manuals
  2. Brands
  3. Ikegami Manuals
  4. Monitor
  5. HTM-1917R
  6. Operation manual

Ikegami HTM-1917R Operation Manual

Hdtv/sdtv multi format
Hide thumbs Also See for HTM-1917R:
Table of Contents

Advertisement

Quick Links

MODEL
HTM-1917R
HDTV/SDTV MULTI FORMAT
COLOR MONITOR
OPERATION MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Ikegami HTM-1917R

Summary of Contents for Ikegami HTM-1917R

  • Page 1 MODEL HTM-1917R HDTV/SDTV MULTI FORMAT COLOR MONITOR OPERATION MANUAL...
  • Page 3 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN SA 1965 SA 1966 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead inside a triangle is intended to warn the user that parts inside the product are dangerous and many cause electric hazards.
  • Page 4 IMPORTANT SAFETY INSTRUCTION 3) When connecting and disconnecting the 1. General power cable, be sure to hold the plug. 1) Read all instructions provided. 4) Do not allow anything to rest on the power 2) Save these instructions for future use. cord.
  • Page 5 3) Upon completion of any service or repairs to paint may peel away. this monitor, ask the service technician to perform routine safety checks to determine that the television is in safe operating condition. 4) For repair service, contact Ikegami’s authorized sales representative or Ikegami service desk directly.
  • Page 6 In such cases, contact the Ikegami 4) If cabinet or screen is dirty, wipe with soft service desk.

  • Page 7: Precautions Upon Use

    Malfunctions occurring in normal use within one year from the date of purchase will be repaired free of charge. This does not apply to the fuses. If no image is displayed after user adjustment or if malfunction is suspected, contact your nearest Ikegami dealer. Accessories This monitor is provided with the following accessories.

  • Page 8: Table Of Contents

    4-7-2 Flow of MENU Operations ....31 2-4-1 HTM-1917R ........4-7-3 Description of MENU 1 Functions ..32 2-4-2 HTM-1917R(with DAM-504/508) ..4-7-4 Description of MENU 2 Functions ..32 4-7-5 Description of MENU 3 Functions ..33 3. Installation ............

  • Page 9: Outline

    HTM-1917R Multi-Format Color Monitor HTM-1917R Multi-Format Color Monitor Compatibility with embedded audio output 1. Outline Equipped with demultiplexer circuit, the optional 1-1. Outline multi-format SDI module (AV or AVD type), which sup- ports embedded audio output, can extract and output...
  • Page 10 BFS (Beam feedback system) Structure with enhanced maintenance and By adopting a BFS circuit for detecting CRT cath- expendability ode current, stable black balance can be obtained The signal processing module, including optional for a long period of time even when the CRT emis- modules, are of the plug-in type which can be easily sion changes.

  • Page 11: General Specifications

    (4) Maximum luminance 2. General Specifications a) SDTV (4:3) : 170 cd/m (typ) b) HDTV (16:9) : 240 cd/m (typ) 2-1. Common Specifications (100% window signal input, brightness: PRESET, contrast: MAX) 2-1-1 General 2-1-4 Deflection/Sync System (1) Power supply: (1) 16:9 display size AC single phase, 50/60 Hz a) NORMAL: 16:9 size within effective CRT...

  • Page 12: Memory

    (2) Shadow function 2-1-7 Applicable Standards The following shadow is created in the 16:9 mode. (1) Safety standards: Conforms to UL1950 Types (2) Electromagnetic interference: FCC Class-A ① 14:9 marker + 14:9 shadow (3) X-ray radiation: DHHS ② 13:9 marker + 13:9 shadow 2-2.

  • Page 13: Multi-Format Sdi Input Module

    2-2-2 Multi-format SDI input module (3) Sampling frequency: 48kHz (Synchronized with video clock) • DKM-511B Multi-format SDI module (Standards) Analog audio output (AV type) • DKM-511A Multi-format SDI module * Analog audio level 0dbs 0.775Vrms Equipped with high performance x/sin x correc- (1) Output terminal: tion type video signal post-filter XLR-5-32 type (Canon 5-pin male)

  • Page 14: Decoder Input Module

    (13) MK-1905 (6) Display device: -∞~-25dB : Green LED 16:9 mask -20~0dB : Amber LED 16:9 mask easily detachable from HTM-1917R escutcheon (14) RS-2020/S 19/20-inch rack mount adapter RS-2020S has a sliding rail. Table 2-3. All combinations of optional slots...

  • Page 15: External View

    2-4. External View (1) HTM-1917R...

  • Page 16: Htm-1917R(With Dam-504/508)

    (2) HTM-1917R (with DAM-504/508)

  • Page 17: Installation

    3. Installation Caution: For your safety, turn off the power of each equipment before connection. 3-1. External connection (1) Standard module (MPU, VIDEO PROCESS) MPU module Option module *Refer to the pages that follow. VIDEO PROCESS module YPbPr/RGB A channel input REMOTE YPbPr/GBR •...

  • Page 18: Multi-Format Sdi Input Module

    (2) Multi-format SDI input module Preinstallment: DKM-511B ... Exchange to other DKM module is possible at the time of shipment. DKM-511* SDI A/B signal input • Input the HDTV or SDTV (4:2:2) signal here. HD / 4:2:2 • Input signal format is automatically identified to control the monitor. CH A CH B SDI signal output...

  • Page 19: Sd-Sdi Input Module

    (3) SD-SDI input module SD-SDI module 4:2:2 4:2:2 digital component module (DK-801A) 4:2:2 CH A SD-SDI A/B input • Input the SD-SDI signal here according to the following module. DK-801A: 4:2:2 serial digital component signal • When this module and multi SDI module are mounted together, this module will be assigned to the 2nd slot.

  • Page 20: Parallel Remote Connection

    3-2. Parallel Remote Connection (1) Pin function CH-B ON CH-C ON Green TALLY ON YPbPr/RGB ON SD-SDI ON MONO ON RGB ON EXT-SYNC ON 16 : 9 ON MARKER ON <Connector Face View on Rear Panel> SHADOW ON Red TALLY ON HD-SDI/MULTI SDI ON <Wiring of Remote Connector>...

  • Page 21: User Adjustment

    4. User Adjustment 4-1. Power Supply ① FUSE Fuse for preventing over-current. FUSE When the fuse is blown, replace it with a rated 6A (250V) slow-blow fuse after 6A250V eliminating the cause. MAIN POWER ② MAIN POWER switch To operate the monitor, turn ON this MAIN POWER switch as well as the POWER switch on the front panel.

  • Page 22: Names And Functions Of Front Controller Parts

    4-3. Names and Functions of Front Controller Parts (1) Names and functions of front panel parts ① INPUT SELECT switch ② DIGITAL switch ③ YPbPr／RGB switch ⑦ MONO(SPLIT) switch ⑧ APT switch ⑨ ASPECT switch ⑩ SCAN switch ⑭ DELAY switch ⑲...
  • Page 23 ⑤ TEST switch <Wide Band MONO Mode> Turn ON to switch to the internal TEST signal. When the NTSC composite signal (DE801 mod- The following standard TEST signal formats are ule) is selected, the luminance signal will be sub- provided. jected to either the COMB or TRAP filter process- Switch the format at the MENU 1-5 item.
  • Page 24 ⑩ SCAN switch ⑮ HUE manual control Use the SCAN switch to switch between normal This control serves as a MANUAL/PRESET data scan and under-scan. selection switch as well as a manual data variable control. ⑪ SCREEN switch The control pops out and is switched to the When displaying the individual R, G, B screen col- MANUAL state with each press (the LED lights).

  • Page 25: Names And Functions Of Drawer Panel Controls

    (2) Names and Functions of Drawer Panel Controls MENU switch ENT switch ESC switch STORE PRESET switch U.DISPLAY switch CLEAR switch FILE 1 switch CHANGE PRESET switch FILE 2 switch FORCED COL/MONO switch FILE 3 switch MATRIX IN switch DISPLAY SELECT STORE CHANGE FORCED...
  • Page 26 ④ EXT SYNC switch b) HUE PRESET switch Set this switch to EXT when externally synchro- When the HUE MANUAL switch on the front panel nizing the analog input signal. The switch does is ON, set it to PRESET. The switch is enabled only not function when digital signals are input.
  • Page 27 ⑪ WIDTH switch ⑯ R. BACKGROUND switch Switch for adjusting the width of the active screen Switch for adjusting the low light balance (red com- by scan size and aspect. ponent). For details of the adjustment, refer to 4-6 (3). ⑰...
  • Page 28 STORE FILE switch MENU switch ２ ５ ２ ９ Switch for copying the currently displayed color Switch to call various menus. temperature data to FILE 1 to FILE 3. FILE 1 to FILE 3 blink when the switch is pressed. ENT switch ３...

  • Page 29: Storing And Changing Data In The Memory

    4-4. Storing and Changing Data in the Memory (1) Storing and changing the PRESET data <Example 1> Changing the MK.PHASE, H.CENT, V.CENT, WIDTH, HEIGHT, TRAPEZOID and SIDE PIN. Set the SCAN size to the UNDER SCAN mode using the SCAN switch, and display the 10-division crosshatch marker using the INPUT SELECT MONO...

  • Page 30: Changing And Storing The File Data

    <Example 1> Changing APT INPUT SELECT MONO FUSE DIGI YPbPr/RGB HTM1917R SPLIT ASPECT SCAN DELAY CHROMA BRIGHT CONT FILE COLOR MONITOR MANUAL Set the APT switch to ON. TEST COMB MARK SLOT STNC SCREENS PRESET D I S P L AY S E L E C T F I L E S TO R E CHANGE...

  • Page 31: Types Of Markers

    4-5. Types of Markers ① 80% marker ⑩ 14 ： 9 shadow Active screen area Active screen area 100％ area 14 ： 9 shadow 80％ area ⑪ 13 ： 9 marker ② 88% marker Active screen area Active screen area 13 ：...

  • Page 32: Adjustment Procedure

    (3) Adjusting the white balance 4-6. Adjustment Procedure a) White balance The monitor has four files to store white balance <Before starting> data. The four files are set to the following color The following adjustments will be more precise if temperatures as default.
  • Page 33 ④Initial adjustment of low light Set only the R.SCREEN switch to ON (red screen Set only the R.SCREEN switch to ON (red screen only), and adjust the R.BACKGROUND data so only), adjust the R.BACKGROUND data so that that the red line at Part B in the figure illumi- the red line at Part B in the figure illuminates nates slightly.

  • Page 34: Adjusting The Color Balance

    (4) Adjusting the color balance ② Starting a) Color balance Set the screen to blue only using the SCREEN For the component signal (YPbPr/RGB), adjust the switch. color balance using CHROMA only. If the NTSC * As the luminance difference is hard to discern decoder module DE-801 is mounted, input NTSC when the screen is bright, dim the surroundings composite signal, and adjust the color balance us-...

  • Page 35: Adjusting The Screen Center

    (6) Adjusting the screen centering ② Adjusting H.CENT/V.CENT a) Screen center Set the size to NORMAL using the SCAN switch. Use the following three controls when centering Set the MARKER switch to ON, and display the the screen. 10-division crosshatch. Different data can be set for the respective signal Adjust the horizontal direction of the marker us- formats.

  • Page 36: Adjusting The Screen Distortion

    (7) Adjusting the screen distortion (8) Adjusting the screen size a) Screen distortion a) Screen size The SIDE PIN and TRAPEZOID controls are pro- Set the screen size using HEIGHT and WIDTH. vided to adjust the screen distortion. The following four sizes can be set for these two Pressing the EXPAND switch executes these ad- data per signal format (three sizes for HDTV).
  • Page 37 d) Adjustment procedure 2 (NORMAL SCAN (HD 16:9, SD 4:3/16:9) e) Adjustment procedure 3 (HDTV 4:3 SCAN) Adjust HEIGHT and WIDTH for HDTV 16:9 and Adjust HDTV 4:3 SCAN as follows. ① Input signal SDTV 4:3/16:9 NORMAL SCAN as follows. ①...

  • Page 38: Menu Functions

    4-7. MENU Functions (1) List of MENU All functions can be executed in the MENU screen. Table 4-1 List of MENU MENU MENU1 ① HD-SDI FM Setting the format of HD-SDI inputs <FORMAT> ② RGB/YPbPr FM Setting the format of YPbPr/RGB inputs ③...

  • Page 39: Flow Of Menu Operations

    (2) Flow of MENU Operations MENU can be switched as follows using the MENU switch. ＜ Normal Screen ＞ MENU switch ON MENU1 <FORMAT>→ 1080I/60 Set the format of each input signal. 1.MULTI SID FM AUTO 2.RGB/YPbPr FM HDTV 3. →1035/1080I 1035I/60 4.

  • Page 40: Description Of Menu 1 Functions

    (3)Description of MENU 1 Functions * Note the following description on the menu. The vertical deflection frequency “/60” includes both 60 Hz and 59.94 Hz. The vertical deflection frequency “/48” shows 24 sF (23.98 sF). 480i/59.94 and 575i/50 are displayed as “525I/60” and “625I/50”, respectively. MENU1 <FORMAT>→...

  • Page 41: Description Of Menu 3 Functions

    ⑤ Setting of CHANGE ASPECT ⑧ Setting of degauss ON timer Associate the change of aspect settings with the Set the operation start time of the degauss (de- switching of inputs. magnetization) function, which operates automati- AUTO: Display with the aspect ratio preset for cally when the power is turned on, using 0 ~ 9 each channel.

  • Page 42: Description Of Menu 4 Functions

    ① Currently selected LOCK MODE If you forgot your password, contact the nearest The currently selected LOCK MODE is displayed Ikegami dealer. here. We will provide a password to exit the LOCK mode. UNLOCK: All data can be changed with the LOCK released.

  • Page 43: Description Of Menu 6 Functions

    (8) Description of MENU 6 Functions MENU6 <SETUP(ASP-80)> 1.ZERO CARIBRATION ① Zero calibration 2.AWB(6500k) ② Auto white balance (6500K) 3.AWB(9300k) ③ Auto white balance (9300K) 4.AWB(USER DATA) ④ Auto white balance (User data) 5.MEASUREMENT & MEMORY ⑤ Color temperature/luminance measurement and memory 6.REAL TIME MEASUREMENT ⑥...

  • Page 44: Messages Displayed On The Screen

    4-8 Messages Displayed on the Screen Message Explanation Cause: This message is displayed during the LOCK mode (see 4.7(7)) or when FILE 1, FILE 2 or FILE 3 switch is pressed. ALL LOCK Action: Release the LOCK mode (UNLOCK), and resume the operation. Cause: This message is displayed when CHANGE PRESET switch or STORE FILE switch is pressed during the PRESET FILE setting in the LOCK mode (see 4.7(7)).

  • Page 45: Installation Of Options

    5. Installation of Options 5-1 Option Module <Notes> ① Modules should be inserted into the slots specified in the figure below. ② Optional modules should be inserted into the slot Nos. 2-5. (The figure below is an example. These modules may not be installed in the product you purchased.) ③...

  • Page 46: Rack Mount Adapter

    5-2 Rack Mount Adapter (1)RS-2020S *The parts marked are supplied with the slide rail. *marks are attachments for the side rail. Rack Mount Adapter for HTM-1917R/2050R SLIDE RAIL (RACKSIDE) BRACKET ＊ ＊ ＊ ＊ MONITOR RACK METAL MCB4-12FZ N1H5FZ SLIDE RAIL...

  • Page 47: Remote Controller

    5-3 Remote Controller (1)RCT-30A Infrared Remote Controller 49.5 18.3 MONITOR SELECT CALL MONO INPUT DELAY SCAN COMB SYNC DEGAUSS FILE MENU MARKER WHITE BALANCE CHANGE CLEAR PRESET REMOTE CONTROL RCT-30A 54.5...

  • Page 48: Src-301Z Serial Remote Controller

    (2)SRC-301Z Serial Remote Controller 220 1 240 1...

  • Page 49: Memo

    6. Memo Although various PRESET DATA has data of the following kinds, write down customized PRESET DATA for your memorandum. If you have modified the PRESET DATA unintentionally, you can restore the default setting by executing LOAD FACTORY in MENU 3-4. DATA REF.
  • Page 51 © Nov. 2006 by Utsunomiya Factory of Ikegami Tsushinki Co., Ltd. ■ All right reserved. Reproduction or duplication, without permission of Ikegami Tsushinki Co., Ltd. of edition or contents in whole in part, any manner, is prohibited. ■ Specifications and design are subject to change without notice.
  • Page 52 Ikegami Tsushinki Co., Ltd. 5-6-16, Ikegami, Ohta-ku, Tokyo, Japan 146-8567 Phone:(03)5700-1111 Fax:(03)5700-1137 Ikegami Electronics (U.S.A.), Inc. HEAD QUARTERS: 37Brook Avenue, Maywood, New Jersey 07607 Phone : (201) 368-9171 Fax : (201) 569-1626 NORTHEAST OFFICE: 37Brook Avenue, Maywood, New Jersey 07607...

Table of Contents