Table of Contents
Advertisement
(6) Description of MENU 4 functions
MENU4 <STATUS> (REF.)
HUE
50.0 HEIGHT
CHROMA 50.0 WIDTH
BRIGHT 49.4 H.CENT
CONT
55.7 V.CENT
G.GAIN 58.5 H.PHASE 47.3
B.GAIN 32.6 TRAPE
R.BKG
52.0 SIDE P.
G.BKG
52.0
B.BKG
55.1
APT
OFF
NEXT (MENU) EXIT (ESC)(%)
a. Displays the current file.
b. Displays data.
a. Displays the current file
The currently selected file is displayed.
b. Displays data
Preset data calculated down to the first decimal place is
displayed as percentage.
(7) Description of MENU 5 functions
MENU5 <LOCK> (UNLOCK)
-ENTER PASSWORD-
ABCDEFGHIJKLMNOPQRSTUVWX
YZ123456789
PASSWORD
****
NEXT
(MENU) SHIFT (
SELECT (
) EXIT
Press MENU/ENT switch
after setting a four-digit password.
MENU5 <LOCK> (UNLOCK)
-ENTER PASSWORD-
ABCDEFGHIJKLMNOPQRSTUVWX
YZ123456789
PASSWORD
ABCD
MODE
ALL LOCK
NEXT
(MENU) SHIFT (
SELECT (
) EXIT
a. Displays the state of set LOCK.
b. Password choices
c. Input a password.
d. Set the LOCK state.
a. Displays the state of set LOCK
• UNLOCK
It is possible to change all data..
• ALL LOCK
It is impossible to change or switch any preset data.
• PRESET & FILE LOCK
It is possible to do switching between files only.
b. Password choices
To set a password, select characters and numerals from among
these alphanumerics using the ↑↓ switches.
a.
59.4
75.3
52.2
25.4
b.
52.7
8.5
a.
b.
c.
)
(ESC)
a.
b.
c.
d.
)
(ESC)
c. Input a password
To set the LOCK state to ALL LOCK or PRESET & FILE or
cancel the LOCK (UNLOCK), select arbitrary characters and
numerals from among the password choices to create a four-
digit password and input the password here.
CAUTION
If you forget your password, contact the nearest Ikegami dealer.
We have a LOCK cancel password.
d. Set the LOCK state
When the MENU/ENT switch is pressed after a password is
inputted, the LOCK state selection field blinks and a change
can be made there using the ↑↓ switches. After setting, execute
the selected LOCK state using the MENU/ENT switch. The
use of the ESC switch returns to the previous state.
(8) Description of MENU 6 functions
* For details of operation, refer to the operation manual for
ASP-80.
MENU6 <SET UP(ASP-80>
1.ZERO CALIBRATION
2.AWB (6500K)
3.AWB (9300K)
4.AWB (USER DATA)
5.MEASUREMENT & MEMORY
6.REAL TIME MEASUREMENT
NEXT
(MENU) START (
SELECT (
Select four items using the
and start using the
*AWB (USER DATA)*
-SELECT OPERATION-
1.L:120 X:0.313 Y:0.329
B:0.01
2.L:120 X:0.313 Y:0.329
B:0.01
3.CHANGE USER DATA
SELECT (
a. Zero calibration
b. Auto setup 6500K
c. Auto setup 9300K
d. Auto setup user data
e. Measure and memorize white balance data.
f. Measure white balance data.
g. User-set data
h. Change user data.
a. Zero calibration
Make a zero-adjustment of the auto setup probe. The calibration
must be executed without exposing the light-receptive spot to
light.
The calibration cannot be executed if the auto setup probe (ASP-
80) is not connected.
Also, if the light-receptive spot is exposed to light, "ERROR:
TOO LIGHT" will be displayed. Ensure that it is not exposed
to light.
34
)
) EXIT (ESC)
keys
keys.
) EXIT (ESC)
a.
b.
c.
d.
e.
f.
g.
h.
Advertisement
Table of Contents
